Healix Conmem Gold prp NiTi Rotary Files are Made in India Control Memory NiTi Rotary files. They are heat-treated files. HEALIX CONMEM PRO GOLD ROTARY FILES are rotary files for conducting root canal treatment. It belongs to the third generation of Rotary Endodontic Instruments. It is extremely simple to use. These files help in cleaning and shaping the root canal complex following Schilder's objectives. It requires minimal effort and provides the clinician with excellent results. These are available in 21mm and 25mm.

The shape and strength of files with straightened spirals can be restored during autoclave and reused. Files not returning to their original shape should be discarded.

Healix® CONMEM PRO GOLD ROTARY FILES can be used with crown-down, step-back, or our recommended single-length technique.

Step-by-step instructions to use these rotary files:

Sx-Golden, S1-Purple, S2-White, F1-Yellow, F2-Red, F3-Blue

• Step 1: Use manual K-File Preparation up to number #20 K-File. Create straight-line access to the canal orifice(s) with emphasis on flaring, flattening, and finishing the internal axial walls.
• Step 2: Start the Endomotor (preferably Healix Endomatic Endomotor). Use the Sx File. Set Speed to 300 rpm and Torque 4.8 ncm or 48 mncm. Conduct the orifice opener and create straight-line access to the canal orifice with emphasis on flaring, flattening, and finishing the internal axial walls.
• Step 3: Use S1 File.Set torque to 4.8 or 48. Take the S1 file -4 of the working length. Eg. if Apex is 20, go till 16. Use BRUSH AND FOLLOW MOTION TECHNIQUE.
• Step 4: Use S2 At a Torque of 1.5 ncm or 15mnm. Go full working length. Use BRUSH AND FOLLOW MOTION TECHNIQUE. S1 and S2 will clean 1/3 and 2/3 of the Coronal Area of the Tooth Structure
• Step 5: Use F1, F2, F3 as the Finishing files which clean the 1/3 and 2/3 of the apical area. Below is the Torque to use for F1 F2 and F3. For these Finishing Files, FOLLOW AND BRUSH MOTION TECHNIQUE needs to be followed.
• Step 6: Obturate using any Gutta Percha Points (GP Points) with Variable Tapered (F1, F2, F3)

Speed and Torque Setting for Healix Rotary files:

Features

1) Cyclic Resistant

• 350% more resistant to cyclic fatigue
• Improved Resistance, cyclic fatigue resistance time
• Triangular cross-section: Sharp cutting edges

2) Gold Treated

• Advanced memory alloy tech with an elegant dark gold color
• Controlled memory files
• Gold thermal treatment: Enhances cutting efficiency

3) High Flexibility

• Extreme Flexibility: To negotiate any canal
• Super–flexible gold alloy

4) Tip

• Advanced Tip Process, Avoid Forming Steps
• Safety Tip: Non-cutting tip to minimize apical transportation

5) Rust – free

• Corrosion Resistant

6) Disinfection

• Autoclavable

Packing: Pack of 6 Nos Healix Control Memory Niti Files